high quality NSK bearing I used to rebuild my 8 yr old 2HP pentair pool pump motor. Compared these to the Nachi （japanese） bearings which equaled the static & dynamic load ratings but the NSK bearing is rated for 17k rpm vs 12k rpm for the Nachi...was a no brainer in purchasing these for roughly the same price.
---- wusstig
Name : Evan Wright From : USA
Time : 2020/4/9 Review:★★★★★
Good quality bearings. Made in USA. Installed on input shaft on a snowblower fit and function was good.
---- Evan Wright
Name : RMH Hennekens From : Netherlands
Time : 2020/4/06 Review:★★★★★
these bearings fit to the most input shafts of sitmowers with a dana spicer transaxle old ones with 4 5 6 gears i am from the Netherlands in europ you cant find them any more
---- RMH Hennekens
Name : JEH From : canada
Time : 2020/4/2 Review:★★★★★
Glad to have found these. The transaxle on my sears tractor was starting to grind gears while under load. The input shaft was loose. I hammered the old bearings out and screwed these new ones in using a threaded rod.... they work like a charm!
---- JEH
Name : J. Dueck From : Philippines
Time : 2021/3/23 Review:★★★★★
I thought I was going to have to replace my ceiling fan. I found one of these bearings. They are very smooth and appear to be of the highest quality.
---- J. Dueck
Name : Rolando From : Italy
Time : 2020/3/11 Review:★★★★★
Ottimo prodotto spedizione superveloce pienamente soddisfatto.
---- Rolando
Name : Mr. David G. Allsopp From : uk
Time : 2020/02/03 Review:★★★★★
Bearings clean and well packaged. Needed a replacement bearing for my lathe motor.
---- Mr. David G. Allsopp
Name : Mike From : mauritius
Time : 2020/1/28 Review:★★★★★
Purchased for my neighbor for there mower bearing is working perfectly.
---- Mike
Name : Amazon Customer From : poland
Time : 2020/1/25 Review:★★★★★
smooth operation both sides of the bearing protected by metal cover
---- Amazon Customer
Name : T.L. From : Korea
Time : 2020/1/3 Review:★★★★★
Replaced the no-name Chinese bearings in my belt sander with these and WOW what a difference!
The sander is quieter runs smoother and cooler than it ever did. The bearings fit into the bores perfectly and will keep my sander going for at least another 10 years!
There‘s no substitute for high quality!
Name : wusstig
